Ingcaciso yeMveliso
Iimbonakalo:
1. Umatshini usebenzisa ujongano lwekhompyutha yomntu ukulawula yonke inkqubo yokusebenza, ukulayisha ngokuzenzekelayo, ukuvuthela ngokuzenzekelayo, ukuwisa ngokuzenzekelayo. Iisilinda zesenzo zonke zihlanganiswe ngeeswitshi ze-magnetic induction. Qhagamshelana ne-PLC ukulawula inyathelo ngalinye kwaye uvavanye isilinda nganye. Isenzo esilandelayo siya kuqhubeka emva kokuba inyathelo lokuqala ligqityiwe, ukuba inyathelo lokuqala aligqitywanga, i-alamu ngokuzenzekelayo kwaye ayisebenzi. I-PLC ibonisa indawo yengxaki.
2. Ngokwemfuno ekhethekileyo, sebenzisa i-cross double crank pressed clamping, ngamandla aqinileyo okubamba. I-mold open stroke inokulungiswa ngokwemfuno ekhethekileyo.
3. Isantya esikhawulezayo, indawo echanekileyo, isenzo esigudileyo. Ubungakanani bebhotile ukonga ixesha. Iqela lobushushu ngokwahlukeneyo.
4. Izibane ze-heater ezi-infrared ezikude zineendlela eziqinileyo zokungena, ii-preforms zifudunyezwa ngokulinganayo ngelixa zijikeleza, i-PLC okanye i-electronic pressure adjustor ilawula nganye
5. Inkqubo yokubonelela ngomoya inefuthe elincinci, ifuthe eliphezulu, amanyathelo aphantsi oxinzelelo, ukubonelela ngomoya owaneleyo kwiimveliso ezahlukeneyo.
6. Uyilo oluthile lwe-pre-heater lwenza ukuba i-pre-heater ivalwe ngelixa ifudumeza. Tshintsha indawo, nciphisa i-heating tunnel kwaye unciphise ukusetyenziswa kwamandla ngokobukhulu bebhotile ngelixa uvuthuza.
7. Isixhobo seoyile yokuthambisa esizenzekelayo sikhusela umatshini kakuhle. Ukulungiswa okulula, ukhuseleko njl.njl.
8. Inkqubo yokwenziwa kwemveliso izenzekela ngokuzenzekelayo ngokupheleleyo ukuze yenze umgangatho ophezulu kwaye ingabi nangcoliseko. Igcina utyalo-mali oluncinci, ukusebenza kakuhle, kwaye kulula ukuyisebenzisa.
Inkcazo
| I-LQB-3 | |||
| Isiphumo sethiyori | 3300 | IiPC/h | |
| IMVELISO | Umthamo ophezulu | 1.5 | L |
| Ubude obuphezulu | 360 | mm | |
| Ububanzi obukhulu | 105 | mm | |
| UMQONDO | Inani lemingxuma | 3 | / |
| Ubukhulu bepleyiti yomngundo (LxH) | 430×360 | mm | |
| Ubukhulu bomngundo | 188 | mm | |
| Ukubetheka kokuvula komngundo | 110 | mm | |
| YOMBANE | Amandla | 220-380V50-60Hz | |
| Amandla ewonke | 18 | KW | |
| Amandla okufudumeza | 15 | KW | |
| INKQUBO YOMOYA | Uxinzelelo Lokusebenza | 0.8-1.0 | I-Mpa |
| Ukutya Umoya Okusebenzayo | ≥1.6 | M3/umzuzu | |
| Uxinzelelo lokuvuthela | 2.6-4.0 | I-Mpa | |
| Umoya Ovuthuzayo Osebenzisa Umoya | ≥2.4 | M3/umzuzu | |
| OMATSHINI | Ubukhulu bomzimba oyintloko (LxWxH) | 2.7×1.45×2.5 | M |
| Ubunzima bomzimba obuphambili | 2200 | KG | |
| I-autoloader yangaphambili | 1.9×1.9×2.2 | M | |
| Ubunzima obuzenzekelayo obulungiselelwe kwangaphambili | 200 | KG | |
